3 Bow Bimini Installation Instructions
Components (Included in the box)
3 Bow Port Frame
3 Bow Starboard Frame
Webbing Straps x4
Deck Mounts x2
S/S Saddles x4
Tube Ends x2
3 Bow Bimini Assembly Instructions
FIT CROSSBARS INTO STARBOARD FRAME
LAY FABRIC AS SHOWN (SLEEVES UP).
FEED THE CROSSBARS THROUGH FABRIC SLEEVES
ATTACH WEBBING STRAPS TO BIMINI (4 PLACES)
The bimini is now assembled. Before mounting, you may trim the bimini for your optimal height. Trimming the bimini and reducing the height will significantly increase stability.
ATTACHING THE BIMINI TO THE BOAT
a. Mark the attachment positions (2 places for deck mounts) Keep Bimini level whilst marking.
b. Center Deck Mount over marked position.
N.B. Make sure the Deck Mounts “lean” is towards the inside of the boat.
c. Drill holes for Deck Mounts on marked positions to suit screws used.
N.B. The type of screw used will be determined by the construction of your boat (gunwale).
d. Fit the Deck Mounts. (2 places)
e. Attach the bimini to Deck Mounts. (2 places)
ATTACH SADDLES TO THE BOAT (4 places)
a. Mark the attachment positions (4 places)
b. Drill holes for Saddles on marked positions to suit screws used (8 places)
c. Secure saddles in place (4 places)
N.B. The type of screw used will be determined by the construction of your boat.
ADJUST WEBBING STRAPS TO TENSION THE BIMINI
Integrated Storage Boot Instructions
RELEASE THE SNAP HOOK
UNZIP PANEL ON THE REAR POCKET TO RELEASE STORAGE BOOT PANEL
FOLD THE BIMINI & PLACE THE WEBBING STRAPS ON THE TOP
FOLD PANEL OVER BIMINI TOP & WEBBING STRAPS